Questions:
Posted on Thursday, February 23, 2017 on product Sloan EBV-500-A Single Flush Side Mount Retrofit Kit
-
0voteA: The stall door will need to be closed and any non-permanent object removed from the sensor's path. If you have any other questions our experts are here to help! Call or text 800-518-5388Posted by Kully Supply on Thursday, February 23, 2017
Posted on Tuesday, January 31, 2017 on product Sloan EBV-500-A Single Flush Side Mount Retrofit Kit
-
0voteA: The first thing to check is to make sure the water supply valve is open all the way. If that doesn't resolve your issue, we have rebuild kits that you can easily replace. You can find them here, http://www.sloanplumbingparts.com/sloan-royal-repair-kits If you have any other questions our experts are here to help! Call or text 800-518-5388Posted by Kully Supply on Tuesday, January 31, 2017
Posted on Wednesday, August 17, 2016 on product Sloan EBV-500-A Single Flush Side Mount Retrofit Kit
-
0voteA: Below are the manufacturer instructions for replacing the batteries. After installing the batteries the sensor automatically calibrates; if not calibrated properly you will encounter issues with the automatic flush. Using the supplied battery compartment hex wrench, remove battery compartment from Side Mount unit. Remove batteries from compartment tray. Install 4 new C-cell batteries into compartment tray (note the position of batteries in tray), and reinstall compartment tray into the Side Mount unit. The Side Mount unit comes preset from the factory. If special circumstances require adjustment of the activation distance, please contact Sloan. The Side Mount unit calibrates upon power up, GREEN and RED LEDs flash once. The unit will actuate a flush followed by 5 flashes of GREEN LED. The unit will then perform calibration, a 20 second sequence, where the GREEN LED flashes quickly. Finally the unit will start normal operation. Manual flush button on Side Mount unit allows manual activation, when desired.Posted by Kully Supply on Wednesday, August 17, 2016
